Aggregate used in concrete production. must be loaded into the aggregate feeding unit bunker by a loader. For loading with conventional methods, a loading ramp was created on the side of the aggregate bunker goods inlet. The loader operator would fill the bucket from the stock pile and climb the ramp, pour the aggregate into the bunker and go down to refill his bucket and this cycle would continue, thanks to the aggregate feeding unit manufactured by NOWA, there is no need to create a ramp and the loader operators do not have to go up and down the ramp every time. Therefore, the operating and maintenance costs of the system are quite low.
Feedback Unit Features
Technical Specifications
Trailer Chassis
- It is made of İPE 220 St-44 profile.
- King Pin diameter is 2”.
- Transportation dimensions
- Width: 2,450 mm:
- Length: 12,250 mm:
- Height: 4,000 mm.
- It is mounted on a single axle with scissors. (290 mm x290 mm x2,000 mm)
- It is equipped with a brake system and lighting devices in accordance with the regulations.
- There are 2 tires with dimensions 277-265 R 19.5 on the single axle.
- All metal surfaces are cleaned after welding and the final coat of paint is applied after the primer.
Aggregate Bunker
- It is designed to have a geometric volume of 5 m and is manufactured using 4 mm.
Thickness St-37. - On the upper surface of the bunker, there is a sieve made of 0 16 mm transmission steel with a mesh size of 100 mm x 100 mm that does not allow the passage of large materials.
Get Offer
Nowa Group is aware that customer satisfaction and after-sales support are important for permanence and success. We provide design, installation and technical service of our concrete plants 24/7. Contact us for detailed information.